Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Excellent. more antweights!
My mate just got the same motor for his spinnery ant, seems pretty powerful so this should be one to watch out for as well. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Tue Sep 20, 2011 9:44 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Looks the same build as the one in nyant just a different KV, i'd put some locktite on the ring as I think it comes only press fitted and jaemus' bot popped it off initially. _________________ ( •_•)
Joined: 04 May 2011
Posts: 66
Location: Sydney NSW
The motor is held together by a clip on the base of the whole assembly. The weapon sis only press fit on at the moment using some Jaycar pully assemblies. I plan to add some glue and optimism.
Tue Sep 20, 2011 10:12 pm
Kenvs001
Joined: 04 May 2011
Posts: 66
Location: Sydney NSW
New update, perspex chassis is done.
Current weight is 137g before i cut of alot of wiring and modify the battery connector from large red plug to removable 1s batteries.
Looking good. Ditch the heatshrink of the HK10s and get some kapton tape if you need a few extra grams. You can also remove one of the 5V regs if you get really desperate too _________________ Steven Martin
Twisted Constructions
http://www.botbitz.com
Wed Sep 21, 2011 10:41 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
perspex as in acrylic? Very brittle stuff, i'd try to get some polycarbonate for future which won't shatter nearly as easily. Plastix near arncliffe always have a handy array of offcuts they give to me for next to nothing. _________________ ( •_•)
I also just noticed the edges on the acrylic. _________________ Steven Martin
Twisted Constructions
http://www.botbitz.com
Thu Sep 22, 2011 12:15 am
Kenvs001
Joined: 04 May 2011
Posts: 66
Location: Sydney NSW
Ok Updates on "Flint"
Its good to go, weights 130g and will add coke bottle armour given its previous effectivness. One fully invertible mobile angle grinder ready for tomorrow.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum