I have a heap of parts for projects that I will probably never have time to make, so all the excess parts have to go to make room in the workshop. I will be adding stuff over the next week or two as I find it. All prices pluss postage if you are not picking up. Remember that as well as getting a terrific discount off these mostly unused parts, you are not paying any international shipping, so the deal is even better!


DeWalt “new style”18V drill motor, SOLD! to Aaron

Whyachi MS05 power switch, SOLD! to Jeff F.

Chain & sprockets SOLD! to Garry

Sidewinder ESC SOLD! to Trent

Scorpion ESC SOLD! to Andrew

IB3600 cells SOLD! to Steve (Marto)

HR-SC2600 NiMH batteries SOLD! to BH Mike

Trantorque bushings SOLD! to BH Mike

Jeti ESC SOLD! Andrew W.

AXI 2808 outrunner SOLD! Andrew W.


Pulleys:

One x Stenco 4" aluminium pulleys with 1/2" bore (as used in Orbit & Snak Masheen) Brand new, cost around $12. I will machine the bore and flange to your spec for $10 each.

One x Stenco 4" aluminium pulley, slightly used, cost around $10 and has a 3/4" bore plus the flange is machined flat for mounting on a blade. $5


Plenty more stuff will be posted up - Radios, antennas, beetle motors, ESCs of all sizes, wheels, armour, more batteries, chain, sprockets, fans, pulleys, timing belts & pulleys, shafts and more
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Last edited by Nick on Tue Jun 12, 2007 10:38 pm; edited 8 times in total

Ill take the Whyachi switch.
_________________
Jeff Ferrara
fb@ffej.net

ffej.net

Sold! Do you want to wait for the next event?
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Yep, next events all good, I might take the 3600's too, gotta decide whether to go A123 or not . . .
_________________
Jeff Ferrara
fb@ffej.net

ffej.net

Quitting beetles Nick?
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Keeping just a few bits, but basically yes.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

I'll take that new Dewalt off your hands! PM Bank Details!

Damn you ffej! I was hanging out for that switch
_________________
https://www.halfdonethings.com/

DeWalt sold - now you have to make an active weapon!

Do you want the Trantorque, or is it free for other buyers?
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

quote:

---

Originally posted by TDT:
Damn you ffej! I was hanging out for that switch

---

Will take the 3600s if ffej decides not to take them.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

quote:

---

Originally posted by Nick:
DeWalt sold - now you have to make an active weapon!

Do you want the Trantorque, or is it free for other buyers?

---

Would that transtorque be similar to the one welch uses to hold his pulley to his ev per chance? Got some pulleys I want to attach to an 8mm shaft which it might be able to be used in.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Doh, it will only fit a 5mm shaft, found mainly on Dewalt and Thingap motors
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

quote:

---

do you really want me to beat you with a weapon next time?

---

Bugger, worth a shot.
I'd be using friction drive on that thingap so no point for it.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH