Ajax
Experienced Roboteer
Joined: 17 Jun 2004
Posts: 298
Location: Sydney
|
Some Specs to wet the appertite.
Class: - Feather Weight
Each Eye..
Weight: - 2 kg
Dia: - 120 mm
Shaft Dia: - 8mm
RPM min: - 10,000 (Will not be made if rpm is lower then 10,000)
Eye Support plate: - 10 mm Alu
Base Plate: - 5 mm Alu
Motor for Eyes: - ? (Looking)
This is still in very early design stage so some if not all specs may change. _________________ It's all about the destruction.
|