Parsec is a new challange I can attempt without needing to spend hours in the workshop.

Parsec is a UK ant, at 150g.

Specs:
Drives: Four modified micro servos - Slow but easy.
Weapon: Tiny outrunner from UH but don't underestimate it, 140W! Spinning a little Ti bar
Battery: 2S, 360mah lipo, 20-30C
Armour: Garolite and thin polycarbonate. Some aluminium perhaps.

The cad is rough because it's modelled off proposed specifications, and will be updated once all my gear arrives...

I'm not really expecting anyone else to make robots this tiny, this is more of a personal interest in seeing how small I can make a proper combat robot...
Size? 126mm wide by 117mm and under 20mm high. Sounds like fun!
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Antweights are built to a 100 x 100 x 100 cube size limit
_________________
https://www.halfdonethings.com/

Indeed they are, if anyone bothers to have a competition for them i'll remake it that small.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

It has arrived now plz.

They certainly gave me enough wheels I only ordered 8 XD
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Your frame materials will be on theri way shortly Looking at the CAD, you really should have called it nanohazard; its a tiny ringer for the original overhead spinner
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Actualy, looking at the parts, i might make an undercutter.
I could call it mini sissorhands.
It means I can follow the proper 10cm cube rule, and turns out jason and warran have antweights too so that's almost as much competition as the beetles!
Another problem is the battery is way overkill for a tiny antweight, and I can't afford the weight of four servo drives. Just messing with designs for now, but whatever it will be it will be nasty.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

A small Scissorhands- could it be called Toe Nail Clippers? If you need some different Ti for the bar, just ask...
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Lol! I'll have to get back to you on that... Perhaps.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

What about this?
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Well, -$50 and i've now got a set of tiny gearmotors on their way for parsec.
Should be ok, if only to cure my frustrations with servos!
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

...lol

Nick, where's the garolite and cf? I hope it didn't get lost!
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Construction has commenced, problem with something so damn tiny is you need to reduce the size of all the wires, tedios is an understatement!
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

looks good
_________________
Mechanical engineers build weapons, civil engineers build targets

Cheers for the comment Jake!
It's pretty much done, driving and weapon works. Just needs a tiny collar to hold the blade in place and a connector to shorten the battery wire...

_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

looks kickass lol
needs painting if you have the weight
_________________
Mechanical engineers build weapons, civil engineers build targets