www.robowars.org

RoboWars Australia Forum Index -> Builders Reports

Tactical Strike - Team KO - VIC
Goto page Previous  1, 2

Post new topic   Reply to topic
  Author    Thread
Timothy Forde
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 247
Location: Vic ,Belgrave South


 Reply with quote  

*looks at weight of robots and dies of shock*

Dont worry I died in a good way. Got myself some digital scales (only up to 5kg). But anyway Tactical Strike(the bot name the rammer being Tactical the twack Strike) has be weighed.

Tactical came in a 4.2kg missing the front wedge(as seen in pic), side skirts, ESC, wires and some bolts.
As I was allowing for it to be 7.5kg that gives me at least 2.5kg for front wedge\side skirt armor and thats nice to know! Should be able to get some good armor with that.

Strike came in at 3.5kg missing the ESC, bolts, wires again good as I was allowing 6kg.
That gives around 2kg for the blades to weld onto the outer shell(3mm steel) so im very happy with that. Hopefully fit in a small wedge as well for some basic defence from ramming.

Very happy with that part just hope it all keeps going so well
_________________
Team KO

Post Sat Dec 27, 2008 8:08 pm 
 View user's profile Send private message Send e-mail MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect


 Reply with quote  



robots together



pusher with stainless steel marine hinges apparently,



beginnings of the teeth for the thwackbot one
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Tue Dec 30, 2008 10:14 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Timothy Forde
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 247
Location: Vic ,Belgrave South


 Reply with quote  

Thanks for putting the pics up glen.
finale weight of robots is
Strike - 3.86
Tactical - 4.75

So thats the full bots just missing the teeth for strike and wedge/ skirts for tactical.
Should get this under weight easy,

Both drive as planned lol. strike is impossible to drive in a straight line due to the motors so close but getting a nice speed when spinning even if a bit unbalanced. Tactical drives fast and is easy to control. only worry will be its ability to push another robot but im sure if it gets under one it shall manage even if a tad slow and I don't mind that. battery's and ibc handle it easy though motor do get warm fast so ill have to watch that.

So thats that just need to finish last few things and its set.

Here we come robowars
_________________
Team KO

Post Tue Dec 30, 2008 10:35 pm 
 View user's profile Send private message Send e-mail MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect


 Reply with quote  

more targets for me at robowars Surprised




_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Thu Jan 08, 2009 8:26 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
timmeh
Experienced Roboteer


Joined: 20 Jul 2004
Posts: 2523
Location: Victoria


 Reply with quote  

hey tim what are those banebots gearboxes like?

Are they just fancy drill gearboxes or better gears?
_________________
Tim Team Reaper.

Post Thu Jan 08, 2009 8:38 pm 
 View user's profile Send private message Send e-mail
Knightrous
Site Admin


Joined: 15 Jun 2004
Posts: 8511
Location: NSW


 Reply with quote  

I've got something that would work really well in Strike, will bring it to RoboWars to show you Tim Smile
_________________
https://www.halfdonethings.com/

Post Thu Jan 08, 2009 8:53 pm 
 View user's profile Send private message
Timothy Forde
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 247
Location: Vic ,Belgrave South


 Reply with quote  

Thanks for that glen.

The gearboxs? No idea at this point, ask me after the event.

Any ideas to make strike hit harder ill look into heh but for this event its a good start.

Only thing left to do if add some foam, wire up safety swich and light to both bots and last decorate it.
Going with army theame heh.

Camo tape for the bots and yowie suit for me. And who ever the other driver is ill throw some camo on :p.

On that note if someone is going and wants to drive the spinner (ill admit theres not much to it and all it dose is spin) there welcome to so if anyone knows someone let me know. I have someone for march but not robowars.
_________________
Team KO

Post Thu Jan 08, 2009 9:36 pm 
 View user's profile Send private message Send e-mail MSN Messenger
andrew



Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W


 Reply with quote  

does it matter if its a fellow competitor.

Ill drive if you want, should be a bit of fun

The banebots r a mixed bag, some poeple have had numerous issues with them but some people have had no problems, Daniel and Andrew have used them in Devastator and Hellcat and they worked fine at their rated voltage.

I have 4 with banebots wheels in orbit, got some jaycar motors which pump out some more torque then the stock motors and they have worked fine so far.

I replaced all bolts with cap head style (use allen key to do it up etc) as the bolts that come with require a phillips head and can strip easily, generally add a nice layer of lithium grease of wd40 to keep everything running real smooth. Bearing blocks to support the shaft

Only issue so far for me was the bearing blocks last event were not supported due to lack of time they were just sitting in there not bolted to anything and on the huge backflip against dylon the downward force on the back left wheel was enough to crack the front bearing plate where the shaft comes out but with the shaft supported and bearing blocks bolted solid it should prevent that from happening again.

As long as the motors r not run past stock voltage it should be generally pretty descent.
_________________
Andrew Welch, Team Unconventional Robotics

Post Thu Jan 08, 2009 9:57 pm 
 View user's profile Send private message Send e-mail MSN Messenger
Knightrous
Site Admin


Joined: 15 Jun 2004
Posts: 8511
Location: NSW


 Reply with quote  

Roughly how fast does Strike spin? 500RPM?
_________________
https://www.halfdonethings.com/

Post Fri Jan 09, 2009 8:41 am 
 View user's profile Send private message
Timothy Forde
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 247
Location: Vic ,Belgrave South


 Reply with quote  

No idea but 500 sounds right. The wheels do 900 on paper and are about same distance apart as wheel size so in "theory" it would spin at 900....

But the wheel prob do more like 800-850 and there is a huge amount of drag as they spin and the robot is not very balanced so yea 500 in the end sound right.

Oh and so long as my scale is not stuffed end weight of Strike is around 5.4kg

Tactical is 6.8kg so both came in well under weight.
_________________
Team KO

Post Fri Jan 09, 2009 1:42 pm 
 View user's profile Send private message Send e-mail MSN Messenger
  Display posts from previous:      

Forum Jump:
Jump to:  

Post new topic   Reply to topic
Page 2 of 2

Goto page Previous  1, 2

Forum Rules:
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

 

Last Thread | Next Thread  >
Powered by phpBB: © 2001 phpBB Group
millenniumFalcon Template By Vereor.