Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
ummm.... classical music? _________________ They say that he crossed the fine line, from insanity to genius.
Wed Apr 22, 2009 1:29 am
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
I used a dremel to rough up the surface, the bottom bits need a serious iron, 80W is what I used, taking time for it to warm up good between each cell. Flood it with hardcore proper solder! None of that 'no clean' flux stuff.. _________________ ( •_•)
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
Flood it with hardcore proper solder?
Brand me
Iv been using dse digitor brand it would not surprise me its the fact im using DICK SMITH CRAP stuff. _________________ Tim Team Reaper.
Wed Apr 22, 2009 6:42 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
lol, 5core will do you, just get a 500g roll and you're set for a loong time. I don't go near dse anymore... jaycar all the way (even if they have raised their prices...) _________________ ( •_•)
Work has some solder flux that ses solders even rusty steel and some solder to go with it.
And since the tabs are steel.
Guess who can now solder a123s
Man this shiz work well wooot _________________ Tim Team Reaper.
Thu Apr 23, 2009 4:17 pm
Rotwang Experienced Roboteer
Joined: 15 Jun 2004
Posts: 1589
Location: Vic
With those two Ebay sources of M1’s the value for money equation seems to have shifted back to the A123’s again.
I have 12 of them coming from the Hong Kong vender. _________________ Satisfaction is proportional to effort and results.
Mon May 04, 2009 8:32 pm
timmeh Experienced Roboteer
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
Yip dems a123s are cheapiz chipz
Tempted to get some more just cos there cheap and for spares. _________________ Tim Team Reaper.
Joined: 20 Jul 2004
Posts: 2523
Location: Victoria
For the saving of like $10 id go the other guy with feedback.
There are some people selling "a123" replacement cells for dewalt packs that are not a123s they are totally diff lol those 30a discharge cells wonder whats going to happen when they stick a diff capacity and diff chemistry cell into there dewalt pack _________________ Tim Team Reaper.
Tue May 05, 2009 9:19 pm
DumHed Experienced Roboteer
Joined: 29 Jun 2004
Posts: 1219
Location: Sydney
According to the EV people, most of the A123 cells coming from china are either second hand (a year or so of use) or old stock from when Dewalt packs were manufactured there. They are now made in the USA, so any ex Dewalt A123s from china will have been sitting around for a fair while.
There are also copy A123 cells which apparently have the same specs (obviously still being manufactured there but not for Dewalt) _________________ The Engine Whisperer
- fixer of things
Thu May 07, 2009 9:33 am
Rotwang Experienced Roboteer
Joined: 15 Jun 2004
Posts: 1589
Location: Vic
Just got 12 from Hong Kong. Solder up a pack as soon as possible, various other priorities.
The look genuine to me, out of a dewalts pack, welded tabs torn of.
Question is how long will they be available and will they get cheaper.
Might get some more just in case.
Also got the Imax b8. Happy with it so far, haven’t totally worked out all the features yet, probably never will but it works.
Couple of blems on heat sink and loose piece of plastic was rattling around inside it so possibly factory second. _________________ Satisfaction is proportional to effort and results.
Lots of 100 now and more than 10 of them. Still thinking of converting the Gemini to electricity Brett.
_________________ Satisfaction is proportional to effort and results.
Sat May 16, 2009 9:40 pm
Spockie-Tech Site Admin
Joined: 31 May 2004
Posts: 3160
Location: Melbourne, Australia
Yep.. After I get the Dino burner back on the road and am thinking about "The Next Project".. at this rate, A123's should be available in K-Mart by then. I want my Mr.Fusion ! _________________ Great minds discuss ideas. Average minds discuss events. Small minds discuss people
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum