Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Does your original software work with the V2 transmitter? Will you be bringing your laptop to the event? _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Thu Aug 05, 2010 6:19 pm
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Marto, have you ever tried turning your V2 endpoints down to a very low level, such as 10% to see if it will adjust? _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Sun Aug 08, 2010 8:30 am
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Getting back to this. Earlier this morning I tried the alternative software for programming the HK radio. Digital radio I think it was called, the $2 one.
Let me just say its really good. Most people probably won't need to buy the full version as that only lets you save settings. It makes things so much easier than the T6A config one.
Much simpler to use so I would recommend it for anyone setting up there robots. And if its only a one off thing there isn't any need to buy the full version but its pretty good so $2 isn't really a lot to support the good work.
Also you can adjust the endpoints on the recent V2 radios. Works through t6a as well so not sure why we couldn't on yours Phillip. _________________ Steven Martin
Twisted Constructions
http://www.botbitz.com
Thu Oct 21, 2010 6:53 am
andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
Hey,
Am wondering if someone can assist me in how i program my 6 channel hobbyking radio so right stick controlls the robot as in right stick mixing
using standard micro servo's for drives _________________ Andrew Welch, Team Unconventional Robotics
Sun Mar 06, 2011 6:37 pm
Jaemus Experienced Roboteer
Joined: 01 Apr 2009
Posts: 2674
Location: NSW
i just trial-and-error'ed a million combinations till i got it working right _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Sun Mar 06, 2011 7:07 pm
andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
well do u have the final combination that worked? _________________ Andrew Welch, Team Unconventional Robotics
Sun Mar 06, 2011 7:43 pm
andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
can anyone assist in above issue
dying to get this done so i can finish antweight (cant finish it until its driving as i need to cut servo leads and solder them direct to receiver).
Thanks _________________ Andrew Welch, Team Unconventional Robotics
Mon Mar 07, 2011 6:36 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
All my radio gear arrived today for the kids, i'm gonna have a go later and let you know. _________________ ( •_•)
quote:Originally posted by andrew:
well do u have the final combination that worked?
wont help you as it was specific to the orientation of my servos and which channels they were on etc
if you get really stuck i can have a look _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Mon Mar 07, 2011 9:18 pm
danjr1
Joined: 02 Jun 2012
Posts: 30
just before i invest in a new receiver and USB cable for my flysky CT6B (believe its the same as the T6A-V2), i want to double check with people that i will be able to mixing to work with full servos throws on Botbitz 85A escs?
My spektrum never seemed to like it so i had to revert to tank steering.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum