Without heatshrink, please. This will give a better comparison with the B328. I am particularly looking at the 10A speedos for antweights. Much of the wire would be shortened affecting the weight.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

Short wires and no heatshrink


No power wires 3.68g


No wires + Cap removed (if running in a pair with wires going from one to the other this is fine, also can remove one 5V reg if you need <1A.) 3.15g



I should weigh the setup out of scorpy.

Steve
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

Thanks for that. If we want to get 30:1 HPs, how do we do that? I remember Aaron was going to get some in for Nick.

Edit: BotBitz is not on the Wiki part sources page.
_________________
So even the rain that falls isn't actually going to fill our dams and our river systems

10x 100:1 HP Gearmotors
20x 50:1 LP Gearmotors
10x 50:1 HP Gearmotors

Also trialing out a steel faceplate on these to see if it helps with the problem Glen and Steve experienced once with the face plate bending and pulling the screws out. Will test each motor before putting them into stock tonight.

For those chasing 30:1, would you be interested in LP or HP, or both?
_________________
https://www.halfdonethings.com/

Cool, but it looks like they have the same problem as the last ones, the front plate just pushes onto the stand off spacers and the bolt doesn't hold it on at all. Unless they're different which would be nice
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Yeah, you shouldn't be able to see any of the brass... Still, Nice little lot!
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

quote:

---

Originally posted by Glen:
Cool, but it looks like they have the same problem as the last ones, the front plate just pushes onto the stand off spacers and the bolt doesn't hold it on at all. Unless they're different which would be nice

---

thatd be perfect! get onto it haha. Ill grab a few when you can get them happening
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

and if they cant supply em like that, maybe find a supplier for the screws and get some in, and either fit them to your stock yourself, or ship them with the motors?
_________________
<Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls

quote:

---

Originally posted by Jaemus:
and if they cant supply em like that, maybe find a supplier for the screws and get some in, and either fit them to your stock yourself, or ship them with the motors?

---

Yes that was initial idea.

To be fair I have not lost any face plates off these ones only pololu ones. And wheels last event took quite a pounding.

Steel may help to some extent as it is not as soft as the brass. But only one way to find out.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

quote:

---

Originally posted by marto:
To be fair I have not lost any face plates off these ones only pololu ones. And wheels last event took quite a pounding.

---

Perhaps some CnC goodness could be arranged?

drop me a line.
_________________
Mechanical engineers build weapons, civil engineers build targets

Cnc itself doesn't really solve the problem. Main idea was bigger screw head with thicker Ali plate (check with Aaron) still need said larger screws. Only advantage of thicker plate is so screws still sit flush.
_________________
Steven Martin
Twisted Constructions
http://www.botbitz.com

CNC can slove everybody problems lol