They pulled off after killer hit em a few times so will be interesting to see if the collet kind works any better. I'd replace the cone with a nut and body washer for those ones. _________________ ( •_•)
haha but the cone is hella stylish _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Sun Sep 18, 2011 9:06 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
A good idea is a good idea
Roman chariot hubs ftw lmao. Thats great.
Perhaps you could get away with making it a bit lighter by using a crush tube between the adaptor and end nut (like inside the foam wheel) and then you'd only need the one nut instead of 2. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Yeh I think there is a lot of ways they could be made better, with a few mods.
However I was going for easiest and simplest. You require maybe a vice or a pair of multigrips and a spanner to do this. _________________ Steven Martin
Twisted Constructions
http://www.botbitz.com
Mon Sep 19, 2011 10:36 am
Jaemus Experienced Roboteer
Joined: 01 Apr 2009
Posts: 2674
Location: NSW
Fine tuning things yourself is half the fun of being a builder, you can't do ALL the work for everyone _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Mon Sep 19, 2011 11:15 am
Forum Jump:
Page 1 of 1
Forum Rules:
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum