Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
Its all good no rush back to work next week
Sat Jun 09, 2012 8:51 am
Cpnwolfe
Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
so much respect for you guys, just got 2 motors,2 esc,1 120mah batt,and receiver stuck to icecream container with double sided tape,dont even have the esc for the brushless on there.....gonna have to cut some wires down. do you guys run with 2 esc's (2 drive motors)? or use something else? and is there a good link on mixing as is drives like a 3 legged dog.
Sun Jun 10, 2012 3:18 pm
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Congratulations on getting it running. Having the weight in so far front of the wheels will make driving more difficult. If you get a chance to come to an event, you can see how everyone does their robot. It will help a lot.
Assuming you are after information on setting up the channel mixing on T6config, here are some screen shots. Hope they help.
_________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Mon Jun 11, 2012 4:41 am
Cpnwolfe
Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
Wow I really haven't posted here in a while, long story short I have been surfing the forums as I moved house and worked. now that its all under control i'm back! 3k has been under a few revisions since I have been on here, I tried to keep it as a pusher, but the manic in me kept trying to turn it into a spinner. as soon as I can rediscover how to post pics and vids i will upload.
Sat Jun 01, 2013 2:45 pm
Cpnwolfe
Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
Sat Jun 01, 2013 5:03 pm
Cpnwolfe
Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
Sat Jun 01, 2013 5:08 pm
Cpnwolfe
Joined: 29 May 2012
Posts: 454
Location: Rockhampton/qld
Well I sorta fixed it for you. Could you try resizing it when you upload it to imageshack so it displays better.
*Edit* I reuploaded it to imageshack with 640x480 res so it displays nice then used admin skillz to edit your post. I just put normal image shack url in the IMG tags
well seeing as I cannot upload any pics atm (my own fault) here is a short video of my holsaw ant/beetle exploding, skip to 1.25 to see the polu motor head towards my car
Sat Jun 01, 2013 7:55 pm
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Haha damn so much gyro force from that holesaw! A bit too heavy for an antweight perhaps. Awesome show though.
I'd ditch imageshack and go with photobucket... can just select the /img link option and it also resizes your images automatically. Much easier! _________________ ( •_•)
looks like the pololu motor ended up under your bonnet somewhere - that makes your car a hybrid i think _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Sat Jun 01, 2013 8:23 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
How to post images
You need to upload the photo to a host (photobucket works well), get the address of the image (places like photobucket have this available below the image) and then you use the address with the forums IMG tags.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum