Kang - Team Aurora - NSW Goto page Previous1, 2, 3 ... 36, 37, 38
Author
Thread
andrew
Joined: 16 Jun 2004
Posts: 3110
Location: Castle Hill, Sydney. N.S.W
pretty much yeah
sounds savage, but for visual pretty boring _________________ Andrew Welch, Team Unconventional Robotics
Fri Apr 28, 2006 8:49 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
yeah you might want to get speakers for that video hehe, just showing how it sounds... (i would have taken the visuals out all together but god only knows how to do that in wmm) you should hear it on a full 24v now.. oh baby hehe _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Fri Apr 28, 2006 11:20 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
well heres how i put the motor back together if anyones interested, it was far too difficult to put the holes in the side so this worked well.
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
kang went aight today, the retimed fan motor really worked rather well actually, it didnt seem to suck up too much more current than normal altho the speed was way faster and spin up time much slower.
the batteries are definitely showing there age though, in the final rumble it was barely moving and the batteries where just so hot it wasnt funny... like freezered for 10 minutes and they where still broiling.
no drive problems though, no wheels loosening or burning drive motors so good good.
but orbit royalled buggered it in the rumble. because the saw was too low it would bottom the wheels out on the ground so i ran it upside down = instant ownage of it by orbit. a few panels are bent in, one of the castor blocks is ripped off, the tabs that hold the lid on are ripped, the saw and plate on the motor got torn off and smashed the roof while it was still spinning XD and two cracked welds.
im not gunna bother repairing it. ill keep the frame and maybe use it at a later date...full effort into raiden at this point for which most of kangs parts will be borrowed _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Sat Apr 29, 2006 11:41 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
also noticed one of my andrew mods has the top of the fibreglass cut up a bit, to the point where you can see the ring gear, but thats still in perfect working order, the top of the motor mount is also close so go the luckyness on that one. _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Sun Apr 30, 2006 10:28 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
DAMAGE
one split weld
two split welds
overall damage, not as bad as i thought originally. definitely easy to hammer out.
the andrewmod damage, works just like they day i got it go andrewmods
I bet most people with aluminium armour are shaking in their booties now lol
I really like those andrewmods... I may request a pair for the new 24v roadkill... _________________ ( •_•)
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
not really, its just bent the ali cause it was hitting at the top of the unsuported panels, if it was running the other way it never wouldve had a problem _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
RoboWars Australia Forum Index
-> Builders Reports
go andrewmods
