Tim
Joined: 30 Oct 2013
Posts: 247
Location: QLD
|
Hey Guys I'd be interested once I've get/built my quad! it's in the mail....here is a list of what I have so far, full kit + a few spares, decent 5/12volt filtered PDB, naze32.
http://www.aliexpress.com/snapshot/6719847968.html?orderId=67739933097278
http://www.hobbyking.com/hobbyking/store/__26453__Turnigy_nano_tech_1500mah_3S_35_70C_Lipo_Pack.html 45C 3S 1.3Ah was only at International warehouse other wise I have bought that.
http://www.getfpv.com/qav250-angled-motor-mount-extensions.html
http://www.getfpv.com/gemfan-5x3-carbon-fiber-propellers-1-pair.html?___SID=U
http://www.dronematters.com/index.php/atas-mini-power-distribution-board-pro.html
I was planning on using the 6 Channel Orange DSM2 TX w/DSMX Satelite RX which from what I have read it's doable with the Naze32 wii for fly by sight, However as there is an extra 2 channels on the RX I'd like to put a 5.8 FPV cam on/in it and tilt it with a servo. Having watched a shit ton of youtube videos/reading Forums so I have a fair idea of what is required FPV side of things.
Question :- There are auto tilt/level functions and manual up/down servo setting types, either way assuming I have the goggles or ground station LCD screen connected to the 5.8 TX and want to move the camera using the Orange TX via a servo operated by the TX as shown here --> https://www.youtube.com/watch?v=gL6GuzjymYA
Which switch/channel on the Orange TX ( HK sent a Mode 1 so when I got it, I moved the gimbles over and changed in software operates as a Mode 2) left all the switches alone, having said all that what channel do I need to use? so I can flick a switch and have the servo move say 45degrees up or down or swap between the auto function as described. Any help would be greatly appreciated, many Thanks in Advance.
Cheers Tim
edit:- I may not be to compete just yet, working on getting a reliable platform setup first.
|