Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Team Demon sale
Time to offload some surplus gear. I've got a terrible habit of buying 3x of the same thing to see which is best, ending up with tons of new unused parts My loss is your gain or something!
Will add to this post as i find more items.
3x Yep 100 controllers: $30 each or $80 for 3x with a free program card
SOLD
These are spares from Demon. Turns out it never blew one across 3+ years of fighting and these have stayed in the packaging
2x IFI victor 885: make an offer
SOLD
Here's a blast from the past. Cobras original Victor speed controllers. They have seen better days visually but still work afaik. One screw won't come out either so i just soldered straight to it lol/
edit - found some new cases for these.
Turnigy C5065-350kv outrunner: $20
SOLD
Nice motor - originally specced to go in demon before the scorpions came about. As you can see the magnets are glued in from new.
2x Team delta dewalt powerdrive: $200 for both ono
SOLD
Cobras original drives. They have the mounting tabs cut off to enable the use of the support kit. History says they worked well! Comes with the shafts and keyway stock, plus two bearing blocks for each if i can find them.
Haven't got a pic of the rest individually so here's a bulk overview
2x 540 magnum style gearmotors: $20 for both
SOLD
Can't even remember where they came from but they work. They have 540 motors and i believe a 10mm shaft - will confirm.
Hobbyking 80 amp reversing controller and program box: $30 for both
This is the one with the fan + red, yellow and blue leads. Purchased as a test for use with my brushless hydraulic actuator. Works fine but the boat one beside it in the pic is smaller and does the same job.
Turnigy marine 50A: $20
As above, bought for hydraulic actuator and it works fine. This one is reversing too and the same size as a tz85
Pile of belts and pulleys: $20 ono
SOLD
various 6b, HTD 5mm T5, H3 size belts etc and some random pulleys in various states of being machined out.
Urethane drill wheels: $30
SOLD
These were in demon to begin with before i got the spoked variety in, they worked fine and still do work fine the spoked ones are still good nearly 7 years later! They have an aluminium center with the required threads tapped in.
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Updated - added some belts, wheels and found new cases for the victors. Sending payment details to everyone now _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Mon Oct 19, 2015 9:09 am
Windhammer
Joined: 19 Jun 2004
Posts: 338
Location: Roleystone WA
I'll take all 3 YEP controllers, belts and pulleys, and the wheels please. Price?
Thanks
Mon Oct 19, 2015 11:34 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Hey man, pulleys and belts are already taken, the rest is yours though. If you let me know what you need i can hook you up with some other sprockets/belts though! _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
Mon Oct 19, 2015 12:25 pm
Valen Experienced Roboteer
Joined: 07 Jul 2004
Posts: 4436
Location: Sydney
Those look like the dual density wheels too, Hard centre on the hub and soft "tyre". _________________ Mechanical engineers build weapons, civil engineers build targets
Mon Oct 19, 2015 12:28 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum