www.robowars.org

RoboWars Australia Forum Index -> The Marketplace

Team Demon sale
Goto page 1, 2  Next

Post new topic   Reply to topic
  Author    Thread
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  
Team Demon sale

Time to offload some surplus gear. I've got a terrible habit of buying 3x of the same thing to see which is best, ending up with tons of new unused parts Razz My loss is your gain or something!

Will add to this post as i find more items.

3x Yep 100 controllers: $30 each or $80 for 3x with a free program card SOLD



These are spares from Demon. Turns out it never blew one across 3+ years of fighting and these have stayed in the packaging Smile

2x IFI victor 885: make an offer SOLD




Here's a blast from the past. Cobras original Victor speed controllers. They have seen better days visually but still work afaik. One screw won't come out either so i just soldered straight to it lol/

edit - found some new cases for these.

Turnigy C5065-350kv outrunner: $20 SOLD



Nice motor - originally specced to go in demon before the scorpions came about. As you can see the magnets are glued in from new.

2x Team delta dewalt powerdrive: $200 for both ono SOLD



Cobras original drives. They have the mounting tabs cut off to enable the use of the support kit. History says they worked well! Comes with the shafts and keyway stock, plus two bearing blocks for each if i can find them.

Haven't got a pic of the rest individually so here's a bulk overview Razz



2x 540 magnum style gearmotors: $20 for both SOLD

Can't even remember where they came from but they work. They have 540 motors and i believe a 10mm shaft - will confirm.

Hobbyking 80 amp reversing controller and program box: $30 for both

This is the one with the fan + red, yellow and blue leads. Purchased as a test for use with my brushless hydraulic actuator. Works fine but the boat one beside it in the pic is smaller and does the same job.

Turnigy marine 50A: $20

As above, bought for hydraulic actuator and it works fine. This one is reversing too and the same size as a tz85 Smile

Pile of belts and pulleys: $20 ono SOLD



various 6b, HTD 5mm T5, H3 size belts etc and some random pulleys in various states of being machined out.

Urethane drill wheels: $30 SOLD



These were in demon to begin with before i got the spoked variety in, they worked fine and still do work fine Smile the spoked ones are still good nearly 7 years later! They have an aluminium center with the required threads tapped in.

Good for anyone using a set and wanting some spares.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz


Last edited by Glen on Wed Oct 28, 2015 11:56 pm; edited 6 times in total

Post Fri Oct 16, 2015 1:25 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Don
Experienced Roboteer


Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland


 Reply with quote  

Is there a keyway in those drives?

Post Fri Oct 16, 2015 1:51 pm 
 View user's profile Send private message MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

Yeah there is, i think its 3mm, will double check for you
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Fri Oct 16, 2015 2:09 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Valen
Experienced Roboteer


Joined: 07 Jul 2004
Posts: 4425
Location: Sydney


 Reply with quote  

so now you sell the cobra drives ;-P
_________________
Mechanical engineers build weapons, civil engineers build targets

Post Fri Oct 16, 2015 3:47 pm 
 View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

Indeed, considering you already have one of them why not take the other and call it $150 Wink
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Fri Oct 16, 2015 3:53 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Don
Experienced Roboteer


Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland


 Reply with quote  

Just checking is it 20 for both those drives,or 20 each

Post Fri Oct 16, 2015 5:32 pm 
 View user's profile Send private message MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

Both Smile
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Fri Oct 16, 2015 5:37 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Don
Experienced Roboteer


Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland


 Reply with quote  

Sold!
What else you got Cool

Post Fri Oct 16, 2015 5:44 pm 
 View user's profile Send private message MSN Messenger
Thomas AIC



Joined: 22 Jun 2009
Posts: 151
Location: Canberra


 Reply with quote  

I'll grab that outrunner if it's still available Glen! Add it to my shopping cart?

Post Fri Oct 16, 2015 8:12 pm 
 View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

No worries, i'll send payment details later today and post them off monday Smile
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Sat Oct 17, 2015 8:58 am 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

Updated - added some belts, wheels and found new cases for the victors. Sending payment details to everyone now Smile
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Mon Oct 19, 2015 9:09 am 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Windhammer



Joined: 19 Jun 2004
Posts: 338
Location: Roleystone WA


 Reply with quote  

I'll take all 3 YEP controllers, belts and pulleys, and the wheels please. Price?

Thanks

Post Mon Oct 19, 2015 11:34 am 
 View user's profile Send private message Send e-mail MSN Messenger
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

Hey man, pulleys and belts are already taken, the rest is yours though. If you let me know what you need i can hook you up with some other sprockets/belts though!
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Mon Oct 19, 2015 12:25 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
Valen
Experienced Roboteer


Joined: 07 Jul 2004
Posts: 4425
Location: Sydney


 Reply with quote  

Those look like the dual density wheels too, Hard centre on the hub and soft "tyre".
_________________
Mechanical engineers build weapons, civil engineers build targets

Post Mon Oct 19, 2015 12:28 pm 
 View user's profile Send private message Visit poster's website AIM Address Yahoo Messenger MSN Messenger ICQ Number
Glen
Experienced Roboteer


Joined: 16 Jun 2004
Posts: 9467
Location: Where you least expect


 Reply with quote  

They are indeed the ones ^
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Post Mon Oct 19, 2015 12:38 pm 
 View user's profile Send private message Send e-mail Visit poster's website MSN Messenger
  Display posts from previous:      

Forum Jump:
Jump to:  

Post new topic   Reply to topic
Page 1 of 2

Goto page 1, 2  Next

Forum Rules:
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

 

Last Thread | Next Thread  >
Powered by phpBB: © 2001 phpBB Group
millenniumFalcon Template By Vereor.