Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
Latest PCB artwork
Now derated to 20A per channel _________________ They say that he crossed the fine line, from insanity to genius.
Sat Feb 02, 2008 1:50 pm
Fish_in_a_Barrel
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
Interesting turn of events, when I check on the number of relays that ledsales had left on the weekend it was still at 321 units, where it had been for many months. I logged on today to buy stuff and they had 10 left. I bought them all, along with a bucket load of luxons... mmm 20W of luxony goodness...
So with any luck I can make a few of these until I have to change the PCB to accommodate a new relay. _________________ They say that he crossed the fine line, from insanity to genius.
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
because I wanted the leg spacing of that cap. I've bought one that fits *next* to the regulator. _________________ They say that he crossed the fine line, from insanity to genius.
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
hmmm, possibly I may have made a mistake reading the data sheet and etched the track for the relay upside down... or maybe I was tired last night when I was eyeing off all of my purdy lights. But the relays are cute, about the size of my thumb _________________ They say that he crossed the fine line, from insanity to genius.
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
Yes, but slowly. I'll see what I can salvage from the old two boards, or the chips may have been fried from massive voltage spikes
I hope to have something done by this weekend but I've recently learned many lessons about making promises. _________________ They say that he crossed the fine line, from insanity to genius.
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
Yep, I can't remember whether I was drunk, tired or both when I did this pcb, but the relay falls on the wrong side of the board... time for some dodgy wire hax _________________ They say that he crossed the fine line, from insanity to genius.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
RoboWars Australia Forum Index
-> Builders Reports
