|
Nick
Experienced Roboteer
Joined: 16 Jun 2004
Posts: 11802
Location: Sydney, NSW
|
Team Overkill's downsizing sale!
Team Overkill’s down-sizing sale
.
That’s right, I am giving up on lightweight plans and selling off all my larger parts to fund a beetleweight. All the items below are in great condition, many as new. I have listed all the specifications I know plus the local price you would pay if you bought the item from the original supplier at current exchange and shipping rates, then my sale price. Everything is open to negotiation so if you saw a similar item going cheaper elsewhere, just PM me about it. I can arrange shipping or yo can paick the parts up. Payment can be by chah, cheque or Paypal.
Two 24V, 3.6AH Battle packs – as new
SOLD!
These are original Battlepacks with CP3600 NiCad cells, battery saver rings and hi-temp Teflon shrink wrap. They have only been used to test motors and have never been in a robot. They have 10 gauge silicone wire with a dual 50A Powerpole connector already attached. I can either supply an extra powerpole or replace the powerpole with heavy duty crimped terminal lugs.
These units would cost you at least $230 to land in Australia (plus the connectors). Sale price is $130 per pack which is $6.50 per cell for a virtually unused pack.
14.4V, 3.3AH NiMH Battlepack – good condition
SOLD!
This is an original Battlepack with GP3300 NiMH cells. It has been in a few battles but is still in good condition. It has 10 gauge silicone wire with 45A Powerpole connectors already attached. I can either supply an extra powerpoles or replace the powerpoles with heavy duty crimped terminal lugs.
This unit would cost around $150 to buy for the RMP or Battlepack. As its been in a few fights I will reduce it to $45 and will also throw in new shrink wrap and a set of powerpoles.
Astroflight 940 motor
, with free selection of gears formerly known as a TWA40 gearbox
SOLD!
This is a great drive train combination, but as it’s almost impossible to get more of them I am selling off the motor and you can chose to take the gearbox & wheel for free. This setup is brand new and has never been used in a robot. The pinion can easily be removed from the motor if you don’t need it.
An Astro would cost around $226 to land in Australia from the RMP or other US hobby shop, but I will sell it for just $95 for the entire kit – the robot bargain of the year!
Whyachi MS2 power switch – never used
SOLD!
This monster switch will take 500A for 3 minutes or 175A continuous. It weighs just 135 grams and would look good in anything from a lightweight up to a SHW. This would cost around $100 to land in Australia, sale price of just $25
Four Oatley 100W scooter motor kits – never used
2 SOLD!
2 LEFT!
These scooter motor kits are the “short” version without the extra metal work. I have already removed the useless brake drum, but the parts are otherwise as new. These kits cost $28 each, sale price $15 each. I can also supple a drilling template for the motor mounting screws if you need it.
Two ultra lightweight ½” bearing blocks – never used
SOLD!
These bearing blocks weigh just 50 grams and have a ½” id, perfect for supporting the ends of Dewalt axles. At 50 grams, they would also be light enough to support a weapon axle in a beatleweight. Made by CNCbotparts, they would cost you over $50 to buy from the US, sale price $20 for the pair.
Two bearing blocks, ¾” id – never used
These bearing blocks have self aligning bearings so you don’t have to be too accurate mounting them. They have grub screws to secure your weapon shaft so you may not need extra locking collars. They would cost at least $30 from a supplier, sale price $10 for the set _________________ Australian 2015 Featherweight champion
UK 2016 Gladiator champion
Last edited by Nick on Fri Jul 08, 2005 11:35 pm; edited 3 times in total
|
Fri Jul 08, 2005 11:31 am |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|