u have em courtney, its purely impulse buy on my part so you r more than welcome to them
_________________
Andrew Welch, Team Unconventional Robotics

how much use have the brickpacks had?
and how many loose C's do you have

About 11 loose C cells.
The brickpacks were used in yamum for a couple of competitions, but only ever driving two drill motors.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

He's turning emo or goth or something. Maybe he's just turning...

Got any more cool junk you don't want Angus?

Turning like mayonaise left in the sun...
Maybe lol... I do that the pulley that suits the blades. Two massive 1" bearings in it, the whole thing lathed from a chunk of 7075 ali... hehe.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

But you did say that wasn't cheap. Pm me exactly how not cheap you were talking.

ill take the 4 battery brickpacks if they are still avalible.
also out of interest and for possible usability where did u get the conecters on them?

Yah they're still available. The connectors are the *deans* T connectors and are really good. You can get alot cheap from unitedhobbies.
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=2116
PM me your details and I can work out postage. Courtney you might wanna do that too unless you feel like driving to Bronte.
Maybe not the weapon blades though !
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Nah, I'll just come get the lot if that's alright with you. I don't mind the drive. Saves a trip to the post office for both of us.

Heh yeah fine with me, you might wanna do it on the weekend gives you the excuse to go to the beach after.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

I could use one of those 150w Oatley motors. $14 new, how much do you want for one? I will be using it to turn a fan blade in my new curing oven.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

You can just have it nick lol, you've given me far enough in the past!
Although, some mill help in the next few weeks would be nice.
Not much, just some crucial parts for robowars.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Cool! I am doing a bit of mill work for Jolt & Scissorhands, so that will fit right in - PM some details when you have them.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Hurrr, i'm at it again, only this time i'm not intending to make any money out of it, i just want this crap GONE. Make an offer on anything (except the new green A123s xD) in these pics.
GET

Random small brushless motors, esc's and modded jaycar gearmotors (one stage removed for higher speeds)


Turnigy and Towerpro larger outrunners, aprox 900kv or something.

Maxon gearmotors, efficient as hell, one heavily used other 2 lightly used.

Misc drill gears


3/4" mechanical parts including bushing, shaft collars, case hardened shaft and thrust bearings.

Bevel gears, special ali adaptor for mounting to a motor.

Funky little balljoints, limited travel but strong as hell, from airsprings.

Thingap - semi damaged will only start sometimes, making it pretty useless for the most part XD

Buttload of CF rods and tubes.

Random used C and a couple sub C nicads.

V belt and pulleys.

Fan motors.

Well loved Skysport FM radio 4ch.

30C 1200mah 2S lipo packs, never used at all.

Raptures disk, T10 pulley and bushing (all still spins smooth as silk) has expected wear.

A123 2S packs made for my rc car but didn't use them, dirty from sitting inworkshop.

_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

would you accept a payment of $0 for the hardened shaft
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz