yep have the same problem on the dx3 as well just havent got around to rebinding again
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

quote:

---

Originally posted by CELL DAMAGE!:
jut picked up a new dx6 mode 1 which i wanted with 4 servos and reciever off fleebay for $215au posted.

Can sell the ar6000 reciever and get a bot one unless its legal to use the ar6000 as long as the one failsafe channel is used for the weapon?

---

park flyer dsm part no SPM6000
_________________
Tim Team Reaper.

Dx6 is only DSM as is the reciver that comes with it (ar6000 )

Hmm.. I just found this.
http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=8337
BUT it says this...
"Multi Flapperon, mixer, vtail, FPV, robot controlling hobbiests do not order!"
No failsafe perhaps?
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

LOL $30 radio control.. what is the world coming to coming from the description it seems like it just doesnt have onboard mixing. for $30 i think i might get one and try it out
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

XD i reckon. For noob bots, who cares
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

random question.

The dx6 charger is 11.6v with 120v input would i have any problems if i used a 12v adapter from a drill charger?

I read the dx6 dose not have a charging diode inside so would i have to wire one up?
_________________
Tim Team Reaper.

If you have a charger that can charge NiCad’s just cut the plug end off the plug pack 110-volt charger and make an adapter lead.

We just use whichever triton isn’t doing anything to top up the TX's.

Best to cycle the TX batteries 2 or 3 times occasionally they can have almost no capacity and you cant do that easily on just a trickle charger.

If you put a diode in the TX charging circuit you couldn’t cycle the batteries
with the charger.
_________________
Satisfaction is proportional to effort and results.

On the dx6 can you set a throttle limit?
_________________
Tim Team Reaper.

should be able to, its called servo limit or EPA (end point adjustment)
_________________
Andrew Welch, Team Unconventional Robotics

You can, it's in the manual somewhere or just kindly ask newyn how to do it he knows them back to front.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Not sure if this is totally useless at this stage, but rebinding with the sticks centered didn't really help as I was using the spring return side anyway, but what I found was that using exponential and binding with hi-rates on seemed to fix the problem. And I'm not sure if this has anything to do with it, but the other times I binded it, the transmitter battery indicator were not at the 'full' stage. Hope this helps
EDIT: Yeah, you have to bind it on full battery for it to failsafe properly, I tried re-binding it on 3/4 battery and it had that reversing problem.
EDITEDIT: I just did another test with full batteries and no exponential or hi-rates and it works fine. So as long as you bind in full batteries, you're good to go.
_________________
It seemed like a good idea on paper...

QQ:

Does anyone know if the spektrum nano reciever; http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6396&Product_Name=AR6300_DSM2_Nanolite_6-Channel_Receiver,_Air

Will bind to the DX6? I'm doubting but worth checking...
If not, then would it bind to the DX5i? Cheers
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

dx5 is DSM2 so i imagine it would. i think dx6 is just DSM1.

or you could just buy the $30 one for the price of the reciever alone. the reciever in that is basically 10mm longer then the specs they state anyway + it takes normal servo leads.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz