Will order one or more mills this week. And make the NC-code. I hope...
Hurry hurry!
Last edited by johanrosander on Tue Aug 29, 2006 5:17 pm; edited 2 times in total
Wed May 03, 2006 1:29 am
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
I am developing bot envy. You are setting the design bar very high. Good on you. _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Wed May 03, 2006 7:25 am
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Yeah, very impressive! Be sure to post on how the Ti milling went, i may be interested in doing something simmiler in the future. You have to come down to the NSW annialator too _________________ ( •_•)
your buying a mill?
or getting milling done? _________________ Mechanical engineers build weapons, civil engineers build targets
Wed May 03, 2006 10:03 am
Daniel Experienced Roboteer
Joined: 30 Aug 2005
Posts: 2729
Location: Gold Coast
That titanium shaft looks like some snail cams I'd like to make. Unfortuantly I only know about casting, so I'll be watching how you'll get them machined so I can see how its done. And the machining price of corse.
Wed May 03, 2006 10:33 am
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
Joined: 30 Aug 2005
Posts: 2729
Location: Gold Coast
I think you mean 4-axis. You can do it on a 3-axis machine but you would need to stop and re-set for a new opperation to cut those grooves and square section.
Wed May 03, 2006 3:54 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
ah yes i stand corrected, foward/back side to side up/down and then rotation would be needed.
Today I ordered two solid carbide endmills. And two drills (non solid carbide).
Poof!
~190 AUD gone...
The axle design is altered a little bit...
It's a 3-axis cnc-mill at the university and I don’t have to pay to use it.
I will tell you how the machining went when it's done.
I pray to God that I won't f*** up and ruin the only piece of suitable lump of titanium I got. If I do, then you might not hear from me any more...
I don't have a cad picture of the "jaw setup" yet.
Sat May 06, 2006 2:04 am
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Bad taste joke removed to respect the veiw put forward by Andrew. _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Last edited by Philip on Sat Jun 03, 2006 7:31 am; edited 1 time in total
Sat May 06, 2006 7:30 am
johanrosander
Joined: 30 Nov 2005
Posts: 26
I can shange the previous post if you think it's not appropriate.
Sat May 06, 2006 8:03 am
Philip Experienced Roboteer
Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
I am not worried. I was trying to be funny. _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Sat May 06, 2006 11:08 am
Totaly_Recycled Experienced Roboteer
Joined: 15 Jun 2004
Posts: 1346
Im not going to growl but others might as this is a public forum .if you want it censored just say so and an admin can change it to something like f**k
Sat May 06, 2006 11:12 am
dyrodium Experienced Roboteer
Joined: 24 Aug 2004
Posts: 6476
Location: Sydney
Bah what's our youngest readers? 13? Teenages swear alot, i would know
Good luck with the milling by the way, be sure to set it on a slow speed! _________________ ( •_•)
the person who posted it can edit it by pressing edit.
Suggestion, Make the first one out of Al, a block like that from emco would be ~$20 i think.
(personally i dont think you would bend al but eh thats just me)
After the bot is running, make a second one out of Al with all the improvements you have thaught of, repeat untill you stop improving the design. *then* make the titanium one _________________ Mechanical engineers build weapons, civil engineers build targets
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum