LOL, I used to work around there! If you have a few minutes I can find some likely addresses
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

OK, I don't know 77 Whiting, but there are several auto and metalwork places along there. You should also try Curry Lane and Sawyer lane that run parallel to Whiting and Dickson St; many places have their dumpsters out the back in the side lanes. There is a large drive-in complex on the corner of Herbert & Frederick st, Opposite a holden car yard. They have heaps of dumpsters and in the past I have found useful computer and electronics parts there. At the other end of Frederick St and Reserve Rd, there is a new complex that might be worth checking out.
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

Dickson st!? I live in Dickson st XD
Ah, but this is in Bronte...
Oh also cut to size plastics is somewhere around artarmon, he's already though...
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

Cut to size doesn't have a bin outhe front, but they back onto curry lane (I think) - I might have to visit them myself... There is another interesting place across from Cut to Size - CBC bearings. They do some auto repairs and might have interesting parts in their bin.

Some other places in that area:

A.G.A. Engineering
40 Hotham Pde
Artarmon

A.I.S. Engineering
24 MacMahon St
Willoughby
_________________
Australian 2015 Featherweight champion
UK 2016 Gladiator champion

quote:

---

Originally posted by Nick:
OK, I don't know 77 Whiting, but there are several auto and metalwork places along there. You should also try Curry Lane and Sawyer lane .

---

I'll endevour to out do you tomorrow in mascot (if i can actualy make it)

_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

YAY, welchy sold me a radio

i also bought an ibc from tdt

I'll print you out a manual for the IBC before I send it and I'll also tag the AUX switching leads so you know which is which
_________________
https://www.halfdonethings.com/

hey grassy i work in chatswood most of the time in the minit store in westfields if ya want you can drop in im always willing to have a chat (excluding when im flat stick XD)
_________________
as a shadow is seen and not heard i am here
-Waddy the phoenix

Your cheque arrived today Nick. Congrats, your an owner of a IBC. It will be bundled up into a Express Post pack today and sent out. Expect it tomorrow

I've included a IBC 1.0v manual, some markings on the 12v AUX switching for powering relays, and the 6-pin plug I'll attach a wiring diagram to. I hope you have as much fun as I had with the IBC
_________________
https://www.halfdonethings.com/

awesome tanx heaps, took a trip 2 a local hardware store and got loads of stuff including wire, solder, washers, wood for a base and a face sheild

ok, IBC arrived yesterday, and im off to teh build meet 2day. hopefully i'l get a rooling base up and runnin with a little help, and just might have something forr marayong

ok, so much 4 a rollin base, i got teh mota mounts workin and andrew fogot teh radio, no bigge caus i bought me a venom 4ch v-spec stick radio. but, i cant work out teh servolead connections and thar were no instructions

just found teh instructions, yay