Joined: 16 Jun 2004
Posts: 486
Location: Melbourne
I might be interested in the drum, but If i got the EV for it as well I'd be at the point I always end up at with to much weight in tyhe weapon etc and not enough armour. So I'm out for the EV. I'll let you know about the drum.
Fri Mar 02, 2007 8:47 pm
Fish_in_a_Barrel
Joined: 30 Sep 2006
Posts: 673
Location: Perth, Western Australia
I'm looking at the axe combo. How much does it all weigh?
Sat Mar 03, 2007 2:52 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
Leo RRC has already taken the axe. I'm just organising postage for him.
I'll do an update on the parts....
2 x EV Warriors - $50 each + P&P - Leo 1, Welch the other.
EVwarrior Hammer Mechanism - Leo, Organising Postage
110mm x 260mm x 5mm drum with 20mm bearings installed, ~4kg - Pending Neweyn... _________________ https://www.halfdonethings.com/
Sat Mar 03, 2007 2:56 pm
NMO Experienced Roboteer
Joined: 16 Jun 2004
Posts: 486
Location: Melbourne
Ok finally worked out my weights, I can't get the drum. Sorry I took so long to get back.
Okay, no sales have gone through, so this is all still up for grabs... I need $150 for a Logitek Gaming wheel, so help me out
2 x EV Warriors - $50 each + P&P
3 x pneumatic rams - $10 each + P&P
110mm x 20mm UHMW discs - $5 each + P&P
EVwarrior Hammer Mechanism with 4.8:1 gear reduction and slipper clutch, also has optional 2nd stage reduction for 21:6:1 final reduction - $80 + P&P
110mm x 260mm x 5mm drum with 20mm bearings installed, ~4kg - $35 + P&P
Joined: 30 Mar 2006
Posts: 111
Location: Sydney, Australia
can i get the dimensions of the rams please?
And how much to post it to HMAS Creswell (Jervis Bay)?
Sun Mar 25, 2007 3:50 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
Will get you some details on their sizes tonight.
More stuff to sell.
60x Sanyo CP2400SCR NiCD Cells. Some have shrink wrap, some don't. $4/cell
10x Sanyo CP3600SCR NiCD Cells. In good condition, last used in Offset $5.50/cell
Large amounts of drill cells.. $0.50/cell I have 1200/1300 and some 1500 drill cells... Good for testing things with.
512mb Micro SD card for Mobile Phones, $15... I just bought a 1GB, no longer need.
I'm shifting to LiNP A123 cells and need to sell these to cover the costs of the new packs plus the charging gear.
I also have a spare pair of AndrewMOD's I need to reassemble once I remove the broken left hand screws out of... Might put them up if people are interested. EV's are no longer for sale either, going to keep them for a project now. _________________ https://www.halfdonethings.com/
I'll get back to you on the AMOD's... I'll have to see what the go is with Schmackhed first before I sell of too many of its parts Lool at Woodzilla, might be able to crush more then cardboard with an AMOD in there _________________ https://www.halfdonethings.com/
Tue Mar 27, 2007 9:45 pm
Glen Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
it had some pretty fizyne power for a 12v drill motor on stock voltage. would bend 3mm poly over and penetrate it twice.. (bad use of words there but ill use em anyway XD). just crapped out everytime you crushed somethang.
Might be interested in the 30 cp2400’s. Any more info on them? _________________ Satisfaction is proportional to effort and results.
Wed Mar 28, 2007 7:33 am
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
@Gary: About 20 of them have the green shrink wrap on them, and the others don't. I'll be dismantling them from packs and checking each cell individually (Few cycles with the triton) before I send any of to anyone.
@Anguz: It was an ass of a job to get the Hardox from the company Trent and I dealt with. I'm not parting with it now.... (Well not without a decent premium )
I think I also have 12 GP3300 NiMH cells somewhere, not sure what condition they are in though Might dig them out for a few cycles. _________________ https://www.halfdonethings.com/
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum