Aaaaaaaaaaalrighty then, my first event! dont remember much but il give it a crack

Vs Sorry
sorry had problems, but they were fixed so it went ahead. he hit me a few times then my antenna came out and i died
Winner: Sorry by K.O.

Vs Cobra
after fixing the arial (yay duct tape) I fought cobra (thanx to glen for being a great spotsman and lending his triton- omnis are slow as!) well there was a lot of wegeing and shoving and we both ended up stuck in a corner.
Winner:Cobra by Judges Decision

Vs Cyborg
Another new bot, congrats to Brad Andrew and Dylon for a very well made robot. this was a pushymatch again untill Cyborg lost a wheel (no locite or glue) Cyborg kept going and it went to the judges
Winner: DeathWish by Judges Decision

Vs Sorry (again)
I made it to the semis! this match really proved the durability of DeathWish. it lasted the full 5mins despite a side pannel bent into a ^ shape.
Winner: Sorry by Judges Desision.

RuMbLe!!!!
Utter carnage. i got torn to bits by Snak Maseen and Late. see video

Overall i did well. i am going to shorten both sides and replace the shiteh spikes with a wedge.
_________________
Oh god, that old signature was terrible...

I'm back!

i've been having shyteloads of work at school atm, but now its holiday time, 'bots can take over After the event i atended the bot looked like this;



I've dissasembled it, and got a POP for version 2.0 which will have less spave wastage, less weight and wedgy goodness.

i might make something decent!!
_________________
Oh god, that old signature was terrible...

LOL nice!
If you need any help cutting/welding steel I can probably help. Probably only during the next week or so as we go on holidays after that and then i'm full into yr 12 work.
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

... hmmm.......
_________________
Oh god, that old signature was terrible...

Hammer bot!!!
That'd be too slow for a very good spinner methinks...
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

The speed will be around 378rpm, that is based on the 200/300W scooter motor doing 2750 rpm at 24V. The torque should be around 51kg/cm for the 200W or 77kg/cm for the 300W.

Andrew W

dont forget to derate those factors quite heavily due to 3 drill packs looks good though.
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Shytloads of progress today! (no anguz, i'm not bullshiting) the baseplate is cut out and all but 12 mounting holes are drilled (holes for the scoter motor and the drives) there is only gonna be two drives, and it IS a barspinner atm, but very easy to change to a hammerbot.

EDIT: many thanks to my next door neighbour David, who is a builder. Couldn't have got so much done without your help (anguz stop laughing)
_________________
Oh god, that old signature was terrible...

XD I can't believe its not bullsh*t !
What you using for the weapon bar? Surely not that thin as steel attached to ali L angle...?
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

no, that was just to get the idea. pics of what it is now and a CAD render to be uploaded now


EDIT: car dender lol
_________________
Oh god, that old signature was terrible...

Comments? criticisims? death threats?
_________________
Oh god, that old signature was terrible...

XD the blade doesn't make any sense, you've lightened it's tips... You want max Mass at the tips for higher KE. Just use a straight bar, simpler and would be stronger (plus you could have loads of spares).
_________________
( •_•)

( •_•)>⌐■-■

(⌐■_■)

YEAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAH

i tried to make it look cool. i failed and couldn't be botheredto redo it

_________________
Oh god, that old signature was terrible...