Looking for two 12v battery packs (again), at least 2300mah, either a123, nimih or nicad. Will also want a good charger with them as well.
_________________
It seemed like a good idea on paper...

Ebay for A123's, and Hobby City for chargers.
_________________
https://www.halfdonethings.com/

Would some used Nicad CP3600 cells be useful?

[/img]

WTB: 2 x 100w scooter motors. Anyone got a pair they want to part with?
_________________
https://www.halfdonethings.com/

ive got two you can have free but they sat in a pool of water for a month

on an interesting note these look good!

http://cgi.ebay.com.au/50-125cc-horizontal-Engine-start-bottom-mounted-MP801_W0QQitemZ290312928498QQcmdZViewItemQQptZAU_Motorcycle_Parts_Accessories?hash=item4397ffbcf2&_trksid=p4634.c0.m14.l1262

http://cgi.ebay.com.au/Electric-Starter-50-70-90-110-125cc-ATV-Quad-Dirt-Bike_W0QQitemZ230370194427QQcmdZViewItemQQptZAU_Motorcycle_Parts_Accessories?hash=item35a32233fb&_trksid=p3911.c0.m14
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Yes glen you should buy one with all the millions of dollars you have and tell us the specs lol
_________________
Tim Team Reaper.

Wanted standard p60 banebots shafts.
Also if anyone has 73mm wheels with 3/4 hex hubs they dont need anymore.
_________________
Tim Team Reaper.

quote:

---

Also if anyone has 73mm wheels with 3/4 hex hubs they dont need anymore.

---

fo sale. i probably put them up for sale a thousand times but anyway.

4x omni wheels. have ultra smooth bearings in the center. diameter is about 125mm and width 48mm ~.

1x lipodater

1x massive hydraulic ram. weighs about 4 or 5kg. 80mm bore IIRC. cost $120 and is brand new.

1x taperlock adaptor from small parts. 6mm bore and roughly 21mm outside diameter. theres a few scores in the outer rim but that doesnt affect how it works at all

1x SLA trickle charger 1 amp

14x A123 battery bars. i think i got them from davestoys or something. australian mob.. still in the sealed package. - asking their new price for them but ill ship them free if that sweetens the deal.

1x small pneumatic set from hobby city. its for a model plane gear retract setup. has a tank valve micro servo one way fill valve length of tube. all new never even tried them out

3x small pnuematic rams 1 is a koganei and its 11mm outside diameter and 15mm stroke - also have an identical pair 17mm OD and 15mm stroke. koganei again. was going to be cobras "foot" actuators. there out of a CNC machine i believe. they look basically new and there quality as.

1x disk setup from demon. the old 3 tooth disk with the custom aluminium V belt pulley on it + 2x needle roller bearings. the disk is a little bit bent from bender (about 5mm off) but it spins good. it must do cause i used it for half of the ideas festival ;p - $65

lots of 5mm HTD belts. 15mm wide and 10mm wide. theres about 6 or 7 of em there. if your interested ill count how many teeth they have. half are brand new the other half used once or so.

and also just for expressions of interest maybe looking to offload the brushless etek setup. definitely dont have the $$ to put it in anything anymore so yeah. theres about $1000 worth of parts in it. pre wired and working. only issue on it is the keyway came out on a test and the grub screw widened a 5mm section of keyway right at the back. $600 ONO?

still sorting through plastic tubs full of robot parts so ill probably have more tommorow. if you want pictures of any of the parts just ask. anything without a price next to it make me an offer. you might (nay probably will ;p) get lucky
_________________
www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz

Interested in the Etek, let me see how the finances are this month.

Anyone happen to have a amd phenom 955 they dont want?
_________________
Tim Team Reaper.

Here
_________________
https://www.halfdonethings.com/

Wanted:
any used quality reversible ESC: XXL, sabertooth, victor.... etc

I am tired of trying to use these blue ESC's (whoever said "just buy a proper one" has the right to say I told you so!) IBC's not considered unless much cheaper then new, due to cheapskateness.

also I would love to buy an EV warrior if anyone has one they can sell.

I have an EV Warrior available, it's got a modified shaft for a pinion gear though. It's attached to a gearbox at the moment that was for an electric hammer
_________________
https://www.halfdonethings.com/

what price are you asking for it? and if the shaft is so modified how much would it be including the gearbox? because I am going to reduce the speed anyway.