Joined: 18 Jun 2004
Posts: 3842
Location: Queensland near Brisbane
Have you used this file yet? I just hooked up the B328 and M2 is constantly spinning in one direction. M1 is adjusting via the remote control. If your is working, I must have done something wrong with mine. _________________ So even the rain that falls isn't actually going to fill our dams and our river systems
Sun May 27, 2012 9:24 am
seanet1310
Joined: 08 Nov 2006
Posts: 1265
Location: Adelaide
If you have the inputs in the correct pins as per Aarons instructions then there is little you can do wrong as you did not compile the hex. (I.e check the pins and connectors on both sides)
If you have mixing on the radio as well as on the B328 then that could explain reactions not as expected but should get some variation when adjusting the stick.
Out of interest, what happens if you remove one of the input pins? _________________ Remember to trust me, I am an Engineer.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum