The day I stop giving 100%, is the day I stop competing
Sun Apr 10, 2011 6:04 pm
Spockie-Tech Site Admin
Joined: 31 May 2004
Posts: 3160
Location: Melbourne, Australia
I would cut and bend a 1mm piece of polycarb into a wide V shape, place it over the belt and under the leading edge of the battery packs as a tooth-shield/guide.
and
drill a hole in the appropriate place in the top cover, put a longer bolt on the main weapon shaft with a bush and put it through the top cover to give it some support both sides.
Makes it more of a pain to take the lid off, but otherwise, I reckon the first hit is going to flex the base-plate and its bye-bye battery pack. _________________ Great minds discuss ideas. Average minds discuss events. Small minds discuss people
Sun Apr 10, 2011 6:11 pm
Knightrous Site Admin
Joined: 15 Jun 2004
Posts: 8511
Location: NSW
quote:Originally posted by Spockie-Tech:
I would cut and bend a 1mm piece of polycarb into a wide V shape, place it over the belt and under the leading edge of the battery packs as a tooth-shield/guide.
and
drill a hole in the appropriate place in the top cover, put a longer bolt on the main weapon shaft with a bush and put it through the top cover to give it some support both sides.
Makes it more of a pain to take the lid off, but otherwise, I reckon the first hit is going to flex the base-plate and its bye-bye battery pack.
If you're interested i have an observation, the weapon doesnt seem to get any decent bite into anything, possibly because:
- disc spinning too fast for its size
- teeth are too short
- forward speed is too slow
or some combination of the above
Just my $0.02 if you're looking to improve it
Speed modding the servos alone may fix this problem _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
Sun Apr 10, 2011 9:40 pm
Don Experienced Roboteer
Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland
Im using a 6 bolt and 2 old bearings out of my derby skates(I think they are the same as skateboard ones).
also I was planing to drill and tap the bolt to hold the cover down
I also have some cf that i ws goin to use as a gaurd just couldnt wait any longer to give it a run
And wat makes you think I bought rapture?
Sun Apr 10, 2011 9:55 pm
Don Experienced Roboteer
Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland
He we go started a new bot this weekend.Didnt get much done but its a start lol.....
noname yet
4 wheel drive
4 bar electic lifter
Mon May 02, 2011 5:08 pm
Vignesh
Joined: 17 Jan 2011
Posts: 305
Location: Dandenong North Victoria
Is it going to be long like biohazards arm? _________________ Viggy!
1st Robot in progress!
Mon May 02, 2011 5:31 pm
Don Experienced Roboteer
Joined: 21 Feb 2010
Posts: 355
Location: Gladstone, Queesland
probly will be but I havent really decided yet lol
Mon May 02, 2011 9:20 pm
Jaemus Experienced Roboteer
Joined: 01 Apr 2009
Posts: 2674
Location: NSW
cool outline shape! _________________ <Patrician|Away> what does your robot do, sam
<bovril> it collects data about the surrounding environment, then discards it and drives into walls
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum