Glen
Experienced Roboteer
Joined: 16 Jun 2004
Posts: 9481
Location: Where you least expect
|
ALRIGHT, a brushless ESC.
You have to plug them in with the transmitter stick all the way down. This is so the propeller on your rc plane doesnt spin up when you plug the battery in and hack your hand into a stump
So make sure the trims are centered and you have the throttle stick all the way down.
I can see you're using channel 1 there which is almost 99.9% certainly the problem, so your radio would start with the channel "centered" or half way up not all the way down if you get what i mean. Try holding the stick all the way in one direction and see if it goes through the series of beeps i describe a bit further down.
next maybe the channel is the wrong way round (so the controller -THINKS- the stick is UP) so reverse that.
What you'll find when they work is that they will beep out depending on how many lipo cells you're using, so 4 times for your setup, then a short pause, and if the stick is down and it thinks its all good, give a long beep and you can spin it up.
Other problems can be that you have to program the controller for how many cells you are using manually. or if it doesnt detect a radio signal at all they beep really fast.
What combination of beeps are you getting ? _________________ www.demon50s.com - Minimoto parts
http://www.youtube.com/user/HyzerGlen - Videoooozzz
|